Antminer S9 ~13.5TH/s @ .098W/GH 16nm ASIC Bitcoin Miner [並行輸入品]

Antminer S9 ~13.5TH/s @ .098W/GH 16nm ASIC Bitcoin Miner [並行輸入品]

塩辛い

スムース 愛らしいです

random:name}

限られました

限られました

質と量

優先的

優先的

一般 ?深い

すぐに元の価格を復元

  • モデル番号を入力してください これが適合するか確認:
  • インポート商品
  • 並行輸入商品
  • アメリカ販売品


S9 Specifications:
1. Hash Rate: 13.5 TH/s ±5%
2. Power Consumption: 1323W ±10% (at the wall, with APW3, 93% efficiency, 25C ambient temp)
3. Power Efficiency: 0.098 W/GH ±7%(at the wall, with APW3, 93% efficiency, 25°C ambient temp)
4. Rated Voltage: 11.60 ~13.00V
5. Chip quantity per unit: 189x BM1387
6. Dimensions: 350mm(L)*135mm(W)*158mm(H)
7. Cooling: 2x 12038 fan
8. Operating Temperature: 0 °C to 40 °C
9. Network Connection: Ethernet
10. Default Frequency: 700M

Please note the following:
1. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. Figures provided are at the wall, with AC/DC 93% efficiency, and 25°C ambient temp.
2. PSU: A power supply unit is not included, and you will need to purchase one separately. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 are required on each board. Do not connect more than one PSU to the same hashing board!
3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. If you use different PSU for hash boards and control board, please make sure to power the hash boards first and the control board only after the hash boards have been powered.
The EVGA 1600 G2 power supply is recommended unless you have 205v-264v then use the APW3-12-1600-B2 power supply. One of these power supplies will support one S9.


Copyright ® 2010 - LAMY HOTEL

96A/4 Tran Phu - Nha trang - Viet nam